The ultimate sticker size guide

Size matters. At least for stickers. A tiny sticker gets lost on a big laptop lid, and an oversized one won't do your phone or water bottle any favours either. So which size should you go for? It depends on where your sticker is going to live, and that's exactly what this guide helps you figure out (a measuring tape helps too).

16 Nov 2026

TL;DR:

What is the best size for a sticker?
There isn't one. It depends on where the sticker goes, how detailed your design is and how far away it needs to be seen. Our standard sizes run from 2.5 x 2.5 cm to 20 x 10 cm, and you can always choose a custom size.

What size sticker fits on a phone?
Around 5–6.5 cm on the longest side, with the cameras and edges left clear.

What size sticker should I get for a water bottle?
5–7.5 cm fits most bottles. Taller ones can take up to 10 cm.

How big can a sticker be?
Die-cut stickers go up to 27.5 x 27.5 cm. Heavy Duty Stickers go up to 120 cm on one side.

Is there such a thing as an ideal size for stickers?

Short answer: no, not really. There's no one-size-fits-all, but there is a sweet spot for pretty much every surface. Think about where your sticker is going to live, how detailed the design is and how far away people will see it from.

A few golden rules help a lot, and so does steering clear of a few classic traps:

Do's:

  • Match the size to the surface, and keep clear of cameras, seams and tight curves.

  • Test it at real size. Draw it on paper and hold it up where it's going.

  • Keep it readable. If you can't read it from arm's length, size up.

  • Leave bleed and a safe area. About 2 mm of bleed outside the cutline, and text at least 2 mm inside it.

  • Think about the use. Giveaways can go small (5–7.5 cm), promo stickers bigger (10–15 cm).

Don'ts:

  • Don't cram in tiny details. They can blur when printed small. Save them for bigger stickers.

  • Don't forget curves. A big sticker on a curved surface can wrinkle or lift over time.

  • Don't skip the contrast check. Light designs get lost on transparent or holographic.

  • Don't be afraid to experiment. A slightly odd size can add a lot of personality.

Sticker sizes for mobile phones

For most smartphones, the sweet spot is around 5–6.5 cm on the longest side. Big enough to show off your design, and small enough to keep the back of your phone looking neat. Keep it away from the cameras and the edges, though, since stickers close to the edge have a harder time staying put.

Phones aren't all the same size, to be fair. A smaller model like the iPhone 7 leaves less room, while an iPhone 14 or a Samsung Galaxy S24 Ultra has space for something a little bolder.

Hand holding a phone with a red clear case and a die-cut vinyl sticker reading "ich BIN eine SIRENE"

Die-cut stickers

The classic pick. Die-cut stickers are cut to the shape of your design and come in lots of materials, so your phone gets exactly the look you're after.

Black phone case with a red "Sourcream" transfer logo, next to white trainers with the same logo

Transfer stickers

Want it to look printed on? With transfer stickers, only your design ends up on the case, with no sticker background around it. Great for logos.

Sticker sizes for water bottles

Water bottles are all about curves. A sticker that's too big can wrinkle, bubble or start peeling at the edges, especially on rounded or tapered bottles. And if you want the whole design visible without turning the bottle around, go a little smaller.

For most bottles, the ideal size is 5–7.5 cm on the longest side. Taller bottles, like the 1-litre ones, can take up to 9–10 cm, but keep it simple: the more surface a sticker covers, the trickier it is to apply without bubbles. Luckily, we've also got a whole article on which stickers to pick for your bottle.

Green water bottle with a large Bedrock Sandals sticker, standing on a rock

Die-cut stickers

My go-to. Laminated vinyl die-cut stickers are waterproof, and I'd always add a glossy laminate if your bottle ends up in the dishwasher.

Stainless steel water bottle with a colourful dragon transfer on a heart-shaped background

Transfer stickers

For a cleaner look, transfer stickers put only your design on the bottle. They stick to smooth surfaces like metal, plastic and glass.

Sticker sizes for laptops

Laptops are pretty much blank canvases, so go ahead and make yours your own. Some people go for one single centrepiece, others overlap everything into a full sticker bomb. Either way, a good mix of sizes (or that one perfect sticker) makes it look curated rather than cluttered.

On a 15" laptop, a centrepiece can go up to around 18 x 18 cm, while collections work well with stickers around 5–10 cm. Same rule as for phones: keep the edges clear. Not sure which stickers to choose? We've got a guide for that too.

Laptop lid completely covered in overlapping die-cut stickers in different sizes

Die-cut stickers

Staying put for a while? Die-cut stickers have our standard adhesive with a stronger hold, and you get to pick from all the fun materials.

Hand peeling a yellow banana-shaped removable sticker reading "Peel Me Real Good"

Removable stickers

Like changing things up? Removable stickers have a low-tack adhesive, so they peel off easily when it's time for something new.

Label sizes for jars

Jars are a lot like water bottles: round, and not very forgiving if your label is too big. Measure the flat part of the jar first, and go a little smaller so the edges don't run onto the shoulder or the lid. Keep it classic with a label on the front, wrap it all the way around, or add a smaller one to the lid.

As a starting point, a 5 cm round label fits most small jars, 6.5 cm works on a jar of around 250 ml, and a jar of around 500 ml has room for about 7.5 x 10 cm. Our labels on roll come in widths from 2.5 to 27.5 cm, and we've got a whole article on candle jar labels too.

Jar of Molotous chilli oil with a wide pink wrap-around label

Jar labels

From jam and chilli oil to hand balm. Jar labels work on smooth glass, plastic and other surfaces, on the front, around the jar or on the lid.

Amber glass candle jar with a kraft paper label for The Willow Studio's Earth Bloom candle

Candle labels

Glass jar or metal tin? Candle labels come in round for lids, rectangular for jars or a custom shape, and on rolls that are easy to work with.

Time to grab the measuring tape

There you have it. Pick the spot, measure it, and go a little smaller rather than a little bigger, especially on curves. Still unsure? Draw your sticker on a piece of paper and hold it up where it's going. It takes a minute and saves you a lot of guessing.

And if you need a size that isn't on the list, you can always choose a custom size in the editor.


Author
StickerApp